Kingston HX318C10FWK2 1x8GB DDR3 1866Mhz RAM Memory

HyperX HX318C10FWK2/16 is a kit of two 1G x 64-bit (8GB) DDR3-1866 CL10 SDRAM (Synchronous DRAM) 2Rx8 memory modules, based on sixteen 512M x 8-bit DDR3 FBGA components per module. Total kit capacity is 16GB. Each module kit has been tested to run at DDR3-1866 at a low latency timing of 10-11-10 at 1.5V. Additional timing parameters are shown in the PnP Timing Parameters section below.


Features:

- JEDEC standard 1.5V (1.425V ~1.575V) Power Supply
- VDDQ = 1.5V (1.425V ~ 1.575V)
- 933MHz fCK for 1866Mb/sec/pin
- 8 independent internal bank
- Programmable CAS Latency: 13, 11, 10, 9, 8, 7, 6
- Programmable Additive Latency: 0, CL - 2, or CL - 1 clock
- 8-bit pre-fetch
- Burst Length: 8 (Interleave without any limit, sequential with starting address “000” only), 4 with tCCD = 4 which does not allow seamless read or write [either on the fly using A12 or MRS]
- Bi-directional Differential Data Strobe
- Internal(self) calibration : Internal self calibration through ZQ pin (RZQ : 240 ohm ± 1%)
- On Die Termination using ODT pin
- Average Refresh Period 7.8us at lower than TCASE 85°C, 3.9us at 85°C < TCASE < 95°C
- Asynchronous Reset
- Height 1.291” (32.80mm) w/heatsink, double sided component


Specifications:

- CL(IDD): 10 cycles
- Row Cycle Time (tRCmin): 44.75ns (min.)
- Refresh to Active/Refresh: 260ns (min.)
- Row Active Time (tRASmin): 32.125ns (min.)
- Maximum Operating Power: TBD W (per module)
- UL Rating: 94 V - 0
- Operating Temperature: 0oC to 85o C
- Storage Temperature: -55o C to +100o C

Are you going to buy Kingston HX318C10FWK2 1x8GB DDR3 1866Mhz RAM Memory? All the products from Kingston have the best quality so that you can enjoy your activities without any complications. Place your order of Kingston HX318C10FWK2 1x8GB DDR3 1866Mhz RAM Memory and receive it in a few days. Our aim at techinn is to make good deals accessible to all. We have a large offering of electronics and computers equipment and life style items that is unique.