Vision VFM-DAD/4 Double Monitor Stand 17-27´´

Vision’s VFM-DAD/4 Dual Desk Arm ensure any workspace can enjoy both a clear-desk aesthetic and ergonomic working conditions without compromise. It raises the monitors off the desk surface, or one arm can convert to a laptop or tablet shelf supporting clutter-free working and smaller desk areas.

Each user is able to easily adjust the monitor position to suit their needs, thanks to its innovative weight-compensating spring and tilt-rotate-swivel and height adjustment – ensuring all users benefit from a more comfortable and better working posture.

As well as high-end features the arm is manufactured from premium materials, but through careful design we have been able to keep it very affordable.

The desk arm fits any 17- to 27-inch flat-panel monitor with 100x100 rear mounting holes and a weight no greater than 7kg (15.4lbs) per screen.

Counter-Balancing Spring:
- We’ve swapped out the usual expensive gas struts that tension the desk arm for a spring mechanism. Not only is this much cheaper, it automatically counter-balances the load within a range of 2-7kg (4.4-15.5lbs).

Rotate to Portrait:
- Every user is able to position monitor easily positioned to suit using the almost endless tilt, rotation, swivel and height adjustment provided.

Load Adjustment:
- For lightweight loads like tablets, the bolts on the sides of the arm can be tightened down to stop the arm rising.

Laptop or Tablet shelf:
- Convert the mount into a convenient shelf for laptop or tablet using the provided extension strips with grippy silicon pads.

VESA Covers:
- For an enhanced finish in installations where the rear of the display is on view, hide the ugly VESA mounts using the provided covers - ideal for retail and public-facing environments.

SWL 7 kg:
- The VFM-DAD/4 can support two monitors up to 7 kg (15.4 lbs) each.

Fits Displays Up to 27-inch:
- Works for displays from 17- to 27-inch with 100x100 VESA mounting holes. It will also safely support any larger display with the same mounting points and SWL.

Cable Management:
- Clips are provided for tidy cable routing.

Clamp or Grommet:
- All the parts required to clamp the arm to the edge of a table surface or bolt to the table are provided. (Note: grommet installation requires the drilling of holes in the table.)

Reduced Cost of Ownership:
- Its durable design ensures it will not need replacing for many years. It is easily and quickly installed, adjusted and moved. Together this delivers a very low cost of ownership.

Thumbscrews:
- Thumbscrews are used to fix the display to help speed up the installation of this mount.

Independent Arms:
- Move each arm up and down independently to get the right ergonomic setup.

Features:

- Double-articulated desk mount for flat panels up to 27″
- Converts to laptop or tablet shelf
- VESA plate cover included
- Cable management
- Comes with clamp and grommet fixing options


Specifications:

- Product Dimensions: See Image
- Packaged Dimensions: 390 X 245 X 178 Mm / 15.4″ X 9.6″ X 7.0″ (length X Width X Height)
- Product Weight: 4.5 Kg (9.9 Lbs)
- Packaged Weight: 4.8 Kg / 10.6 Lbs
- Total Safe Working Load: 7 Kg / 15.4 Lbs Per Arm
- Contruction Material: Aluminium, Steel

Vesa Sizes:
- 100 × 100 mm / 3.9″ x 3.9″
- 75 × 75 mm / 3.0″ x 3.0″

Accessories Included:
- 8 x M4 12mm thumbscrews
- 8 x M5 12mm thumbscrews
- 8 x M5 10mm screws for laptop strips
- 4 x Laptop shelf strips with silicon
- 2 x VESA Cover

Vision VFM-DAD/4 Double Monitor Stand 17-27´´ is a product that corresponds to the Supports category within Devices selection at your electronics and computers store, techinn. Wait no more and learn about all the advantages belonging to the community of techinn. What are the advantages of Vision VFM-DAD/4 Double Monitor Stand 17-27´´? This product is designed specifically to provide good support and entirely based on our passion for electronics and computers.