Phoenix PHBS2705BA7 26-40´´ Max 25kg Wall TV Bracket

It is extremely helpful to be able to fix these big TVs to the wall with their corresponding mounts. The VESA (Video Electronics Standards Association) regulation helps the end user to choose the right option and avoid mistakes. VESA regulates the distance (horizontal, and vertical, respectively) of the retaining screws holes located on the back side of all TVs and TV monitors. This distance between screw holes is known as VESA measurements. In VESA 400x600, the first figure (400) corresponds to the horizontal distance between screws and the second figure (600) corresponds to the vertical distance. These kinds of measurements are always expressed in millimeters (mm).

Which VESA measurement is appropriate for my TV?
- The VESA regulation aims at different sizes. The most common sizes are 75x75 mm, 100x 100 mm, 200 x 100 mm, 400 x 200 mm, etc. If you want to know what your TV´s VESA size is, you can look at the back side of your TV support. There you will find the inscription corresponding to the VESA size of the TV support. In case it does not appear, you can directly measure the distance between the retaining screws holes. You can also measure this distance horizontally and then vertically or you can look on the internet for the suppliers´ TV data sheet.

- The appropriate VESA measurement for each case is regulated by the horizontal and vertical distance of the threaded holes. If the horizontal distance of the holes is 400mm and the vertical distance is 200mm, it is a 400x200 VESA measurement what you need and you will have to choose a TV mount with those sizes. It is important to pay attention to the maximum weight that the support is able to hold and the weight of the TV/TV screen.

- When choosing a mount, you will have to consider that the largest VESA size supported will always be shown in its technical specifications. Therefore, the VESA will fit both the largest size and smaller ones. A VESA support with a maximum size (400x200) is also appropriate for TVs with a smaller VESA size such as 200x200mm.

- You also have to consider the global mount measurements. For example, if you do not choose the right size of the mount and it happens to be bigger than expected, it may occur that the structure of the support stands out from the back of the TV. In that case, the support will not be completely hidden behind the TV or screen. Please, check that the total support sizes are not bigger than the TV.

- Another important aspect to be considered is the desired separation between the wall and the TV monitor. There are some flat or ultra-flat mounts that separate just 11mm the TV from the wall. It may also occur that the TV connectors, aerial socket, DC connector, etc. do not fit in such a narrow space. Therefore, before choosing the support please verify how much do the connections of your TV stand out from the back and check if the connections fit in the space between the wall and the TV.

To sum up:
- If you are going to buy a TV support you have to bear in mind the following aspects:
- The appropriate VESA size for your TV.
- The weight that your mount can hold concerning the weight of your TV.
- The separation between the wall and the TV when mounted on the support.
- The total size of the mount structure must be one so that the mount does not stand out from the back of the TV/TV monitor.
- The quality of the mount.

VERY IMPORTANT:
- When mounting a TV support, once the screws have been completely tightened you must not keep on tightening the screw. If that happens, your TV may be damaged. In case the screw is completely tightened and is not fixed enough to the support, use the metallic washers or nylon pieces to fix the problem.


Specifications:

- Allows lateral, frontal and tilt rotation.
- Supports up to 25 kgs.
- Tilt down and up 15 °.
- Rotate / rotate 180º.
- VESA: max. 200x200mm.
- Separation from the wall +/- 7.3cm + 19.4cm arm.
- Up to 26 to 42´´ (indicative inch measures.) To choose support, check the VESA measurement on your television and follow our guidance document.

Phoenix PHBS2705BA7 26-40´´ Max 25kg Wall TV Bracket has the official guarantee from the brand Phoenix. Buying in our online electronics and computers store, you will have Phoenix PHBS2705BA7 26-40´´ Max 25kg Wall TV Bracket at home in a few days. At this moment the product is in stock and the price is 7.99 $. Don´t miss this opportunity!