Nanoxia Deep Silence 4 tower case

The Nanoxia Deep Silence 4 is a solid mini tower case for anyone looking to build a compact and silent performance system. Designed for air cooling (such as Cooler Master Hyper T4) and water cooling (such as Corsair Hydro H55), it fits micro-ATX motherboards with plenty of space for disk drives. You can remove the middle HDD cage to make room for a long graphics card. The sound dampening material is seriously dense, and metalwork is thicker than normal. The included case fans are high-quality rifle bearing, pull in a lot of air and very quiet. The case has built-in two slider fan speed controller with 6 fan plugs so you can easily tune the case for airflow vs sound level. Preinstalled 120 mm Deep Silence fans are attached to the dust filter, which in turn is bolted to the front with 4 screws. On the back of the motherboard, there are plenty of cable management mounts, hooks and straps to help you route and hide cable paths. All the screws you need to assemble components, in this case, are included inside a box with clearly labeled bags, and even includes a power extension cable to make sure the upper left +12V power line can reach without a problem.


Features:

Compact Mini Tower:
- A solid mini tower case with modular drive cages and space for full size components; Excellent choice for a compact performance system with large and powerful GPU.

Silent computing:
- Thicker than normal metalwork, dense sound dampening materials, rubber vibration isolators, and insulated drive doors to keep the noise contained.

Space for full size GPU:
- 2 of 3 HDD cages can be removed to make room for the largest and most powerful graphics card available, with space for 1 HDD and 1 SSD at bottom of case.

Water cooling ready:
- You can also mount one 120 mm radiator behind the front case fan, with direct airflow path to the GPU, and space for 1 HDD and 1 SSD at bottom of case.

Clean, filtered PC:
- Front fan and dust filter are held by bracket that swing out for easy cleaning; Removable of front panel required when cleaning filters.

Easily tune air flow + sound level:
- Top panel air covers can be removed for increased airflow; Includes 6 x 3-pin fan controller and 2 high quality rifle bearing fans.


Specifications:

Dimensions (HxWxD):
- H 380mm x W 200mm x D 480mm (14.9´´ x 7.8´´ x 18.8´´) without case feet

Fan Mounts:
- Front: 2 x 120mm
- Rear: 1 x 120mm
- Top: 1 x 120/140mm

Drive Bays:
- 2 x 5.25´´ (external)
- 1 x 3.5´´ (external adapter)
- 6 x 3.5´´ (internal)
- 1 x 2.5´´ (internal)

Motherboard:
- Micro-ATX, Mini-ITX
- Max CPU Cooler Height: 160mm (6.3´´)

Max GPU Length:
- 265mm (13.5´´) without HDD cage removed
- 395mm (16.9´´) with HDD cage removed

Max Radiator Size:
- Front: 120mm
- Rear: 120mm
- Fan controller with six 3-pin connectors
- 120mm 1300rpm fan (front)
- 120mm 1300rpm fan (rear)
- USB 3.0

Includes
- USB 2.0
- Microphone
- Headphone
- Dust filter (bottom)
- Dust filter (front) bolted with 4 screws
- EPS extension cable

Would like to buy Nanoxia Deep Silence 4 tower case? You are at the right place! In the category of Tower boxes at the online electronics and computers store you can find a big variety of different models at the best price. Find the best electronics and computers products, that adapt to your needs at techinn. Are you looking for a gift? Don´t miss also our Components sales.