Enermax ETS-T50A ARGB 120 mm CPU Fan

The TST T50 AX ArgB is not only a powerful CPU cooler but also distinguishes by its RGB directionable lighting.

The five heat tubes of 6 mm in combination with the innovative airflow optimization technologies achieve a cooling performance of up to 230 W TDP.

For a fast heat transfer the Heat Pipe Direct Touch technology is used where the copper heat tubes make direct contact with the CPU.

An asymmetric heat sink design leaves room for the installation of high ram modules.

The cooler is equipped with a 12 cm high-pressure fan with patented twister Bearing technology and LED RGB address.

Lighting supports synchronization with LED technologies RGB Asus Asrock MSI Gigabyte and Razer.

The assembly system with its own rear plate allows a safe assembly with high contact pressure and provides compatibility with all common Intel and AMD CPUs.

Design The T50 AX ArgB ETS is a tower design cooler with heat pipe transfer.

The cooler is equipped with LED RGB address.

For an autonomous function, the fan shows the RGB lighting effect of the rainbow.

Synchronizable RGB lighting through RGB headers Asus Asrock MSI and Gigabyte base plaques.

Programmable lighting effects through the software of the base plates.

Razer Chroma support with Asrock and MSI compatible base plates.

Note:

The RGB address LEDs function with 5 V do not connect them to a 4-pin heading head with 12 v.

Optimization of air flow Differential flow design (PDF) The conical tunnels create a difference in air pressure which increases the air flow up to 15% and allows the heat to dissipate more rapidly.

Vortex generator flow (VGF) in aviation Spoilers The so-called vortex generators are used to guide the air flow evenly with the wings.

Enermax engineers have applied this technology to the CPU heat sink:

small spoilers on the fins next to the heat tubes create a vortex that brings more fresh air to the back of the heat tubes.

Vacuum effect flow (VEF) Partially closed sides of the heat sink create a vacuum that additionally extracts fresh air from the side.

Heat Pipe Direct Touch (HDT) with patented Heat Pipe Direct Touch technology The heat tubes rest directly on the CPU.

The advantage over a motherboard is the fastest heat transfer without any addition resistance.

Asymmetric heat tube design The asymmetric design of the heat tube creates space additional for the fan to prevent high ram modules from blocking.

Enermax high pressure sheet The T50 AX ArgB STS is equipped with a 12 cm high-pressure sheet fan designed for use in CPU refrigerators.

Patented Twister Bearing technology guarantees a smooth function and a long service life of up to 160,000 MTBF hours.

The 9 high pressure blades rotate a wide range of 500 to 1,600 rpm to back up an ultra-silent function and high cooling performance.

Thermal conductive coating The thermoconduct coating is a thin protective layer that avoids oxidation without compromising heat transfer.

Air Guide The air guide on the back of the cooler proportion control of the air flow for perfect adaptation to the needs of the housing.

Compatibility Fast and easy-to-use universal mounting system compatible with Intel® and AMD® socket (excluding the TR4 SP3 socket).

The pressure adjustment setting system and the Dow Corning® thermal grease of high conductivity guarantee a perfect contact with the CPU heat sink.

Specifications Overview ETS T50A BK ArgB Sockets Compatible with Intel® LGA 1200 LGA 775 115x 1366 2011 (3) Square ILM 2066 Sockets Compatible with AMD® FM1 FM2 (+) AM2 (+) AM3 (+) AM4 Total Dimensions 138 -7 x 112 -5 x 160 mm Total height 160 mm Weight with fan 860G Thermal design power (TDP) 230W + Dow Corning® TC Thermal fat 5121 Synchronization RGB.

3-pin ArgB connector (5V GND data) Synchronization RGB.

ASROCK ASUS MSI Gigabyte Razer Chroma (with ASROCK Base Plates and MSI) Lighting Modes Racing Rainbow Heat Sink Dimensive 135 -2 x 65 x 160 mm Copper Heat Tubes Aluminum Heat Tubes 5X Ø 6mm Coating Sink Heat TCC Black Fan Model High Pressure ArgB Fan PWM Type of LED WS2812B RGB Type of Bearing Twister MTBF 160,000 HA 25 ° C Fan Dimensives 120 x 120 x 25 mm Fan Speed ​​500 1 -600 RPM Fan 12V Nominal Voltage 0.16A Nominal Current Fan (or 0.39A when connected only to the PWM head) Nominal voltage LED 5V LED Nominal current 0.36A 4-pin PWM fan power connector (GND 12V Tacho PWM) Quantity:

1 level Noise 14DB (A) Air Flow 40 -45 121 -17m3 H Air Flow 23.81 71.32CFM Static Pressure 0 -67 3 -07 mm H2O Included in delivery Air refrigerator PWM ArgB ho High Pressure JA 12 cm Universal Mounting Kit for Intel® and AMD® Plugs Dow Corning® (TC 5121) Air Guide Speaker Installation Guide Distributor Information ETS T50A BK ArgB Product Dimensions 138 -7 x 112 - 5 x 160 mm Product weight 1 -44 kg Product box Dimensions 222 x 175 x 130 mm Gross weight of the product box Dimensions from the main box 460 x 370 x 295 mm Gross weight of the main box 12 kg pieces of main cardboard 8 EAN code 4713157724199.

Enermax ETS-T50A ARGB 120 mm CPU Fan has the 100% money-back guarantee. If for whatever reason you are not completely satisfied with your Enermax ETS-T50A ARGB 120 mm CPU Fan you have purchased at techinn, you have 30 calendar days from delivery in which to return it. In addition, in our online electronics and computers store you can discover the full range of product of the brand Enermax and complete your order in CPU Coolers products always at the best price.