Cisco Catalyst 9300-48P Switch

Specifications:

General:
- Device Type: Switch - 48 ports - L3 - Managed - stackable
- Case Type: 1U Rack Mount
- Subtype: Gigabit Ethernet
- Ports: 48 x 10/100/1000 (PoE+)
- Power over Ethernet (PoE): PoE+
- PoE Budget: 437W
- Throughput: Switching capacity: 128 Gbps
- Stackable Bandwidth: 480 Gbps
- Transmission speed: 190.48 Mpps
- Capacity: IPv4 addressing table entries: 32000
- IPv6 addressing table entries: 16000
- Flexible NetFlow entries: 64000
- VLAN ID: 4000
- Switched Virtual Interfaces (SVI):2000
- MAC address table size: 32000 entries
- Support Jumbo Enclosure: 9198 bytes
- Addressing protocol: OSPF,IS-IS,RIP-1,RIP-2,IGMP,VRRP,PIM-SM,OSPFv3,PIM-SSM,rule-based routing (PBR),RIPng
- Remote management protocol: SNMP 1,RMON 1,RMON 2,SNMP 3,SNMP 2c,CLI,NETCONF,RESTCONF
- Encryption algorithm: AES 128-bit
- Features: Trunking, full duplex mode, Weighted Random Early Detection (WRED), Spanning Tree Protocol (STP) support, Access Control List (ACL) support, Quality of Service (QoS), Remote Switch Port Analyzer (RSPAN), Management Information Base (MIB), Cisco StackWise-480 technology, Cisco StackPower technology, Flexible NetFlow (FNF), 802.1x authentication, 16 MB packet buffer, FTP client, 3 fans, Control plane protection (CoPP), Source-Specific Multicast (SSM), integrated Wireshark, VLAN Double Tagging (Q-in-Q), Private VLAN
- Standards Compliance: IEEE 802.3,IEEE 802.3u,IEEE 802.1D,IEEE 802.1Q,IEEE 802.3ab,IEEE 802.1p,IEEE 802.3af,IEEE 802.3x,IEEE 802.3ad (LACP),IEEE 802.1w,IEEE 802.1x, IEEE 802.1s,IEEE 802.3at
- RAM memory: 8 GB
- Flash Memory: 16GB
- Status indicators: Status

Expansion / Connectivity:
- Interfaces: 48 x 1000Base-T RJ-45 PoE+
- 1 x USB2.0
- Expansion Slots: 1 (total) / 1 (free) x Expansion Slot

Feeding:
- Power device: Power supply - hot plug
- Installed quantity: 1
- Maximum quantity supported: 2
- Power Redundancy: Optional
- Power supplied: 715 watts

Diverse:
- MTBF (mean time between failures): 277,770 hours
- Standards compliance: CISPR 22 class A,CISPR 24,EN 61000-3-2,EN 61000-3-3,EN55024,EN50082-1,EN 61000-6-1,EN 61000-4-4,EN 61000-4 -2,EN 61000-4-3,EN 61000-4-6,CCC,ICES-003 class A,EN 61000-4-5,UL 60950-1,IEC 60950-1,EN 60950-1,RoHS,AS /NZS 3548 class A,BSMI Class A,VCCI Class A,EN 55022 Class A,FCC CFR47 Part 15 A,EN 300 386,TVCN 7317,VCCI V-3/2009 Class A,CAN/CSA-C22.2 No. 60950-1

Software / System Requirements:
- Included software: Cisco IOS Universal

Dimensions and weight:
- Width: 44.5cm
- Depth: 44.5cm
- Height: 4.4cm
- Weight: 7.59kg

Environment parameters:
- Minimum operating temperature: -5 °C
- Maximum operating temperature: 45 °C
- Operating humidity range: 5 - 90% (non-condensing)
- Minimum storage temperature: -40 °C
- Maximum storage temperature: 70 °C
- Storage humidity range: 5 - 90% (non-condensing)

At techinn, we show all the characteristics of Cisco Catalyst 9300-48P Switch. In our electronics and computers store, you can find different sizes of Cisco Catalyst 9300-48P Switch. Secure payment and guaranteed shipment! In addition, discover more similar products of Cisco Catalyst 9300-48P Switch and benefit from our other offers of electronics and computers equipment.