Arctic Freezer i13 X CPU Fan

Small footprint for optimal compatibillity:
- The Freezer i13 X combines a compact advanced heat sink design with 3 direct touch heat pipes. In combination with the fan designed for static pressure, an optimal cooling performance is achieved despite the comparatively small dimensions. The Freezer i13 X has an installation height of only 137 mm and there are no limitations in RAM compatibility.

Pre-applied mx-2 thermal paste:
- Pre-applied, high-performing MX-2 thermal paste ensures quick and clean assembly.

Longer lifespan thanks to its low motor temperature:
- The Freezer i13 X uses a fan motor newly developed by ARCTIC. This runs less audibly and more efficiently, so that the temperature of the coils is 20 °C lower than with conventional motors. This increases the lifespan of the fans considerably, allowing ARCTIC to grant a 6-year warranty period for the Freezer i13 X.

Offset heat pipes enable optimal heat dissipation:
- The direct touch heat pipes attached to the Freezer i13 X and an optimised design of the 44 cooling fins together ensure that the heat from the CPU can be ideally removed and released into the air.

P-fan for increased performance:
- Inspired by the P-series, the Freezer i13 X’s fan benefits from all of the advantages of P-fans:
- High static pressure for increased cooling performance
- Broad RPM range
- Lower power consumption
- Less vibration
- PWM for synchronous fan control
For additional information about the P-fans, we recommend our FAQ

Fluid dynamic bearing:
- Thanks to a combination of alloy and lubricant developed in Germany, the friction within the bearing is reduced, leading to greater efficiency. In this way, less heat is generated, there is less bearing noise and the life of the fan is extended.

Direct touch heat pipes:
- The Freezer i13 X uses direct touch heat pipes. This ensures that the heat to be dissipated is transferred directly to the heat pipes without an additional material layer, and transported into the heatsink via the pipes.

More cooling capacity with freezer i13 x:
- The ARCTIC Freezer i13 X sets new standards in cooling.
- Proven to outperform its predecessor in cooling capacity.

More efficient and whisper quiet:
- In addition to operating more quietly, even at maximum speed, the Freezer i13 X’s built-in fan motor is also much more efficient.
- The power consumption was reduced from 0.18 A to 0.07 A, which corresponds to an effective saving of 60 % in power consumption. ARCTIC engineers were also able to reduce the volume by 40 %, allowing the Freezer i13 X to run at a whisper-quiet 0.3 sone when at maximum speed.


Specifications:

- Intel Socket: 1200, 1151, 1150, 1155, 1156
- AMD Socket:
- Ram Clearance: unlimited
- Heatsink
- Heat Pipes: 3
- Fin Material: Aluminum
- Number of Fins: 44
- Fin Thickness: 0,4
- Thermal Paste: MX-2 pre-applied
- Fan
- Fan Size: 100 mm
- Fan Speed: 300 - 2000 rpm
- Fan Bearing: Fluid Dynamic Bearing
- Noise Level: 0.3 Sone
- Current: 0.09 A
- Connector: 4-Pin
- Size & Weight
- Lenght: 86 mm
- Width: 109 mm
- Height: 137 mm
- Weight: 443
- Packaging
- Width: 108 mm
- Height: 145 mm
- Length: 94 mm
- Weight: 0.61 kg

If you are interested in Arctic Freezer i13 X CPU Fan, discover also other electronics and computers products related to Arctic in the Components department and CPU Coolers catalogue. In addition, when buying at techinn, your online electronics and computers store, you join the biggest sports community, where you can find opinions, product reviews, and the best offers that you are interested in.