Apc Surge Protection Power Line 1.8 m Power strip

Features:

- 180 degree Rotating Cord Retainer:A 180-degree rotating cord with strain relief offers flexibility in positioning the SurgeArrest, and in routing the power cord.
- 3 Modes of protection (L-N : L-G : N-G):The remaining modes continue to provide protection in the event a mode of protection is compromised as a result of a surge.
- Building Wiring Fault Indicator:This LED informs users of potentially dangerous wiring problems in the wall circuit.
- EMI and RFI noise filtering:Reduces line noise that can cause data loss and keyboard errors.
- Fail Safe Mode:Most other surge suppressors continue to let power through even after their circuits have been damaged, leaving your equipment exposed to future surges. APC´s SurgeArrest fail safe, which means that once the circuit of an APC SurgeArrest has been compromised the unit disconnects equipment from the power supply ensuring that no damaging surges reach your equipment.
- Lightning and Surge Protection:When measured via ANSI/IEEE 587 Category ´´A´´ and ´´B´´ tests, the suppression performance of the APC Smart-UPS is superior to virtually all separate surge suppressors.
- Power Line Communications (PLC) compatible:Protects PLC network adapters without interrupting network communications.
- Safety-agency approved:The UPS is UL1778 Listed

SurgeArrest Essential Features & Benefits:
Marketing features:
- Data-line Protection:Protection of data lines (Ethernet, Coaxial and Phone lines) ensures complete protection of your equipment from surges. It is very important to protect your equipment from “back door” electric surges traveling through data lines, as they can be as damaging to your equipment as surges traveling over power lines.
- Resettable circuit breaker:Easy recovery from overloads; no need to replace a fuse. (Not available on Wall Tap SKUs)

Safety:
- Building Wiring Fault Indicator:This LED informs users of potentially dangerous wiring problems in the wall circuit.
- Catastrophic Event Protection:SurgeArrest components such as MOVs and Thermal fuse ensure instantaneous reaction to lightning strikes and wiring faults. If the surge components are damaged due to power spike or over voltage, excess power cannot reach your equipment. Unlike the APC SurgeArrest products, most surge suppressors continue to let power through even after circuits have been damaged, leaving your equipment exposed to other damaging surges.
- Fail Safe Mode:Most other surge suppressors continue to let power through even after their circuits have been damaged, leaving your equipment exposed to future surges. APC´s SurgeArrest fail safe, which means that once the circuit of an APC SurgeArrest has been compromised the unit disconnects equipment from the power supply ensuring that no damaging surges reach your equipment.
- Protection working indicator:SurgeArrest will warn you if its circuitry has been damaged by heavy strike or power line surge and it is unable to provide 100% protection. If still under warranty, APC will then replace your damaged SurgeArrest free of charge.

Protection:
- IEEE let-through ratings and regulatory agency compliance:APC surge protectors undergo stringent testing by IEEE, and are awarded ´´let-through ratings´´, which indicate the maximum voltage level that can possibly reach your equipment after a surge or voltage spike has passed through an electric surge protector. Lower IEEE let-through ratings indicate better protection and performance. The APC Essential SurgeArrest series offers optimal performance with a let-through rating of less than 330V to 500V for North American products, and a rating of less than 15% for products sold worldwide. All APC products comply with local agency safety requirements, including UL in North America and CE/Kema/Gost/C-tick/A-Tick/Telepermit in their respective regions.
- Lightning and Surge Protection:To prevent damage to your equipment from electric power surges and spikes.
- Noise Filtering:Attenuates EMI/RFI line noise that can cause data errors and keyboard lockups, ensuring better performance of protected equipment.


Specifications:

- Nominal Input Voltage:230V
- Input Connections:Schuko CEE 7/7P
- Cord Length:1.8meters

Output:
- Number of Outlets:5.0
- Receptacle Style:Schuko CEE 7

Input:
- Input frequency:50/60 Hz
- Number of Power Cords:1

Surge Protection and Filtering:
- Surge energy rating:903Joules
- ts_nm_surge_response:1ns
- Peak Current Common Mode:13kAmps
- Peak Current Normal Mode:13kAmps

Physical:
- Maximum Height:385MM, 38.5CM
- Maximum Width:70MM, 7.0CM
- Maximum Depth:45MM, 4.5CM
- Net Weight:0.7KG
- Shipping weight:0.74KG
- Shipping Height:411MM, 41.1CM
- Shipping Width:135MM, 13.5CM
- Shipping Depth:52MM, 5.2CM
- Master Carton Dimensions (Length x Width x Height):425 x 229 x 429MM
- Master Carton Units:12.0

Environmental:
- Operating Temperature:0 - 40 °C
- Operating Relative Humidity:0 - 95 %
- Operating Elevation:0 - 3048meters
- Storage Temperature:-40 - 85 °C
- Storage Elevation:0 - 15240meters
- Conformance:ApprovalsCE

Equipment protection policy:
- Lifetime : 30000 euros

Standard warranty:
- Lifetime (European Union countries only):Sustainable Offer Status
- RoHS:
Complint

Buy your favorite Electricity and smarthome models and enjoy electronics and computers. You have the right to return within 30 days if you are not satisfied with your purchase of Apc Surge Protection Power Line 1.8 m Power strip. If you have any doubt in buying Apc Surge Protection Power Line 1.8 m Power strip, get in contact with our team of professionals in electronics and computers via telephone or email.