Apc BR650MI Pro UPS

EU PLUG.

BR650MI Features Back UPS Pro BR 650VA, 6 Outlets, AVR, LCD Interface High Performance Computer and Electronics UPS for Premium Power Protection Includes:

USB cable, User Manual.

- Audible alarms Provides notification of changing utility power and UPS power conditions.

- Automatic self-test Periodic battery self-test ensures early detection of a battery that needs to be replaced.

- Automatic Voltage Regulation (AVR) Automatically steps up low voltage and steps down high voltage to levels that are suitable for your equipment.

- Battery failure notification Provides early-warning fault analysis on batteries enabling timely preventive maintenance.

- Battery replacement without tools Enables fast battery replacement, lowering Mean Time to Repair (MTTR).

- Battery-protected and surge-only outlets Reserves power capacity and run time for connected equipment that require UPS battery back-up while providing surge only protection for less critical equipment.

- Boost and Trim Automatic Voltage Regulation (AVR) Gives higher application availability by correcting low and high voltage conditions without using the battery (not available on all models).

- Cold-start capable Provides temporary battery power when the utility power is out.

- Dataline surge protection Provides protection of connected equipment from power surges on the data lines.

- Disconnected battery notification Warns when a battery is not available to provide backup power.

- Green mode Patent-pending operating mode that bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection.

- Hot-swappable batteries Ensures clean, uninterrupted power to protected equipment while batteries are being replaced.

- LCD graphics display Text and mimic diagrams that display modes of operation, system parameters and alarms.

- Safety-agency approved Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.

- USB connectivity Provides management of the UPS via a USB port (not available on all models).

- User-replaceable batteries Increases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR) Back-UPS Pro Features & Benefits Safety Safety-agency approved Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.

Protection Surge only outlets Protect secondary electronics from surges and spikes without reducing battery power used to run primary electronics during an outage.

Battery and surge protected outlets Back up and protect your hardware and data during power outages, surges and spikes.

Dataline surge protection Provides protection of connected equipment from power surges on the data lines.

Marketing Features Boost Automatic Voltage Regulation (AVR) Preserves battery life and maximizes runtime by correcting low voltages without discharging the battery.

LCD Status Display Provides key UPS status at a glance.

Multiple status indicators with load and battery bar graphs.

Green mode Patent-pending operating mode that bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection.

Battery-protected and surge-only outlets Reserves power capacity and run time for connected equipment that require UPS battery back-up while providing surge only protection for less critical equipment Serviceability Simple battery replacement Increases UPS availability by allowing quick, easy battery replacement.

Resettable circuit breaker Easy recovery from overloads.

no need to replace a fuse.

(Not available on Wall Tap SKUs) Availability Boost and Trim Automatic Voltage Regulation (AVR) Gives higher application availability by correcting low and high voltage conditions without using the battery (not available on all models).

Green mode Patent-pending operating mode that bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection.

Transformer-block spaced outlets Protect equipment with input transformer blocks without blocking access to other receptacles.

Battery failure notification Provides early-warning fault analysis on batteries enabling timely preventive maintenance Automatic self-test Periodic battery self-test ensures early detection of a battery that needs to be replaced.

Intelligent battery management Maximizes battery performance, life, and reliability through intelligent, precision charging.

Cold-start capable Provides temporary battery power when the utility power is out.

Customizable voltage-transfer points Adjust the voltage points (widen or tighten the range) where your UPS transfers to battery to maximize useful battery life and protect sensitive electronics.

Customizable voltage sensitivity Toggle between pre-determined voltage-transfer points depending on your power quality (high, medium or low sensitivity), maximizing useful battery life and protecting sensitive electronics.

Manageability Audible alarms Provides notification of changing utility power and UPS power conditions Disconnected battery notification Warns when a battery is not available to provide backup power.

LCD Status Display Provides key UPS status at a glance.

Multiple status indicators with load and battery bar graphs.

USB connection Use your PC to access additional power protection and management Features for your UPS via a USB Port.

Output Output power capacity 390Watts / 650VA Max Configurable Power (Watts) 390Watts / 650VA Nominal Output Voltage 230V Output Frequency (sync to mains) 50/60 Hz +/-1 Hz Topology Line Interactive Waveform type Stepped approximation to a sinewave Output Connections (6) IEC 320 C13 (Battery Backup) Transfer Time 10ms typical:

12ms maximum Input Nominal Input Voltage 230V Input frequency 50/60 Hz +/- 3 Hz (auto sensing) Input Connections IEC-320 C14 Input voltage range for main operations 176.

- 294V Maximum Input Current 10.0A Batteries & Runtime Battery type Maintenance-free sealed Lead-Acid battery with suspended electrolyte:

leakproof Typical recharge time 12hour(s) Expected Battery Life (years) 3.

- 5 RBC Quantity 1 Battery Volt-Amp-Hour Capacity 75 Communications & Management Interface Port(s) USB Control panel Multi-function LCD status and control console Audible Alarm Alarm when on battery:

distinctive low battery alarm:

overload continuous tone alarm Surge Protection and Filtering Data Line Protection Network line.

- 10/100/1000 Base-T Ethernet (RJ-45 connector) Filtering Full time multi-pole noise filtering:10% of IEEE surge let-through:

zero clamping response time:

instantaneous Physical Maximum Height 190MM, 19.0CM Maximum Width 91MM, 9.1CM Maximum Depth 310MM, 31.0CM Net Weight 6.4KG Shipping weight 7.4KG Shipping Height 255MM, 25.5CM Shipping Width 440MM, 44.0CM Shipping Depth 143MM, 14.3CM Master Carton Units 2.0 Master Carton Weight 15.65 SCC Codes 1073130434693 4 Environmental Operating Temperature 0.

- 40 °C Operating Relative Humidity 0.

- 95 % Operating Elevation 0-3000meters Storage Temperature -15.

- 45 °C Storage Relative Humidity 0.

- 95 % Storage Elevation 0-15000meters Audible noise at 1 meter from surface of unit 45.0dBA Online thermal dissipation 13.3BTU/hr.

Do you know all the characteristics that make Apc BR650MI Pro UPS unique. If you are interested in Apc BR650MI Pro UPS, you should know that this product is in stock at this moment in our online store techinn. Our extensive UPS collection will make sure you find exactly what you are looking for and enjoy your electronics and computers activity to the fullest. Enjoy the advantages of buying at techinn and join the biggest sports community.