Apc BE550G-SP Back UPS

Adjustable voltage sensitivity
Provides the ability to adapt the UPS for optimal performance in specific power environments or generator applications.
Audible alarms
Provides notification of changing utility power and UPS power conditions
Automatic self-test
Periodic battery self-test ensures early detection of a battery that needs to be replaced.
Battery failure notification
Provides early-warning fault analysis on batteries enabling timely preventive maintenance
Battery replacement without tools
Enables fast battery replacement, lowering Mean Time to Repair (MTTR).
Battery-protected and surge-only outlets
Reserves power capacity and run time for connected equipment that require UPS battery back-up while providing surge only protection for less critical equipment
Cold-start capable
Provides temporary battery power when the utility power is out.
Dataline surge protection
Provides protection of connected equipment from power surges on the data lines.
Hot-swappable batteries
Ensures clean, uninterrupted power to protected equipment while batteries are being replaced
Safety-agency approved
Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.
USB connectivity
Provides management of the UPS via a USB port (not available on all models).
User-replaceable batteries
Increases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR)

Back-UPS Features & Benefits
Safety
Safety-agency approved
Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.
Availability
Battery failure notification
Provides early-warning fault analysis on batteries enabling timely preventive maintenance
Intelligent battery management
Maximizes battery performance, life, and reliability through intelligent, precision charging.
Automatic self-test
Periodic battery self-test ensures early detection of a battery that needs to be replaced.
Manageability
Audible alarms
Provides notification of changing utility power and UPS power conditions
LED status display
Quickly understand unit and power status with visual indicators.
Marketing Features
Battery-protected and surge-only outlets
Reserves power capacity and run time for connected equipment that require UPS battery back-up while providing surge only protection for less critical equipment
Protection
Surge only outlets
Protect secondary electronics from surges and spikes without reducing battery power used to run primary electronics during an outage.
Battery and surge protected outlets
Back up and protect your hardware and data during power outages, surges and spikes.

Output
Output power capacity
330Watts / 550VA
Max Configurable Power (Watts)
330Watts / 550VA
Nominal Output Voltage
230V
Output Frequency (sync to mains)
47 - 63 Hz
Output Frequency (not synced)
50Hz +/- 0.1% for 50Hz nominal
Other Output Voltages
220
Topology
Standby
Waveform type
Stepped approximation to a sinewave
Output Connections
(4) Schuko CEE 7 (Surge Protection)
(4) Schuko CEE 7 (Battery Backup)
Output Voltage Tolerance
+/- 5% static and 100% load step
Transfer Time
6ms typical : 10ms maximum
Input
Nominal Input Voltage
230V
Input frequency
50/60 Hz
Input Connections
Schuko CEE 7/7P
Cord Length
1.83meters
Input voltage range for main operations
180 - 266V
Maximum Input Current
10.0A
Batteries & Runtime
Battery type
Maintenance-free sealed Lead-Acid battery with suspended electrolyte : leakproof
Typical recharge time
16hour(s)
Replacement Battery
APCRBC110
Expected Battery Life (years)
3 - 5
Battery Volt-Amp-Hour Capacity
86

Communications & Management
Control panel
LED status display with On Line : On Battery : Replace Battery and Overload indicators
Surge Protection and Filtering
Surge energy rating
310Joules
Data Line Protection
Analog phone line for phone/fax/modem/DSL (RJ-11 connector), Network line - 10/100 Base-T Ethernet (RJ-45 connector)
Filtering
Full time multi-pole noise filtering : 5% IEEE surge let-through : zero clamping response time : meets UL 1449
Physical
Maximum Height
89MM, 8.9CM
Maximum Width
224MM, 22.4CM
Maximum Depth
311MM, 31.1CM
Net Weight
6.02KG
Shipping weight
6.93KG
Shipping Height
127MM, 12.7CM
Shipping Width
279MM, 27.9CM
Shipping Depth
400MM, 40.0CM
Color
Black
Master Carton Dimensions (Length x Width x Height)
324MM
Master Carton Units
2.0
Master Carton Weight
14.55
Pallet Dimensions
48inches
# of Layers per Pallet
4.0
# of Units per Layer per Pallet
20.0
Pallet Weight
1230.0lbs.
Units per Pallet
48.0
SCC Codes
1073130427168 7

What do you think about finding Apc BE550G-SP Back UPS with this price? Amazing right? Do not wait longer and buy at our electronics and computers store, that you have been looking for a long time. Equip yourself well and enjoy your daily routine activities to the fullest with Apc. And the best thing is that you have the best price in the market.