Apc AR3106 Rack Frame Cabin

APC NetShelter SX 18U Server Rack Enclosure 600mm x 1070mm w/ Sides.

Feature-rich rack enclosure optimized for easy installation, managing cables, integrating power distribution, and maximizing airflow.

Includes: Casters, Doors, Key(s), Leveling feet, Roof, Side panels

NetShelter SX Enclosures Features & Benefits:

Agility:
Low-profile castors and adjustable leveling feet from underneath or above:
- Enclosures are shipped standard with both leveling feet and castors. Leveling feet can be quickly adjusted through the use of a screwdriver or drill, eliminating the need to reach underneath with a wrench.

Pre-installed full-enclosure height rear accessory channels:
- Integrated and adjustable rear accessory channel provides zero U mounting locations for toolless accessories. Each channel has two mounting bays to support a combination of up to four accessories such as PDUs and vertical cable organizers. 1070mm (42in), 825mm (32 in), and deep enclosures and networking enclosures include two channels. 1200mm (48in) deep enclosures include four channels. Channels are pre-installed at the factory in the rear of the enclosure but can be moved to other locations of the enclosure along the side brace to resituate cable management where it is needed most.

Adjustable mounting rails with captive hardware and rapid alignment:
- The vertical mounting rails can be adjusted in 1/4 in (6.4 mm) increments covering virtually any mounting requirement for IT equipment. Easy alignment feature integrated into the enclosure mounting rail and side brace for quick alignment verification without the use of tools to verify alignment. U positions are numbered front and back for rapid installation of equipment.

Enclosure assemble-to-order (ATO) options capable:
- The Enclosure ATO (Assemble-to-Order) options provide a level of customization for enclosure customers beyond the standard enclosure models. This customization is limited to the assembly of the enclosure itself and does not include additional enclosure mounted components. For example, the enclosure can be assembled without sides, doors, or without sides and doors.

Integrated joining hardware with multiple width enclosure alignment:
- Enclosures include pre-installed joining hardware to join enclosures in a row and provide additional stability to the enclosure. The pre-installed joining hardware includes holes for joining to an adjacent enclosure at 600mm centers or 24in centers depending upon the floor layout.

Convenience:

Easily removable cable access roof:
- Roof can be removed with simple pull-pin hinges for access during equipment installation or even with cabling already in place and routed through the cable openings. Once removed the roof is reversible to reposition the larger cable openings for power distribution plugs and connectors.

Enclosure adjustment tools and hardware provided:
- All enclosures are provided standard with hardware bag that includes hardware for mounting IT equipment and tools for simple enclosure adjustment.

Cable access openings with pre-installed brushes:
- Large cable access slots in the roof provides access for overhead cable egress. The bottom design allows for unobstructed cable access through a raised floor. Roof includes openings with brush strips pre-installed in locations biased towards the front of the enclosure to allow for data cable passthrough and provisions for air containment.

Half-height side panels and option with brush strips for pass-through:
- Half-height quick release side panels reduce size and weight for easy handling and access to equipment. Side panels are lockable utilizing a single key with the doors. Now available are side panel options integrated with pass-through holes and brush strips for routing cabling to adjacent racks in a row while still maintaining proper airfow.

Perforated front door with curved profile:
- Perforated front and rear doors provide ample ventilation for servers and networking equipment. Front door perforated area is optimized with a curved profile to provide greater surface area and allowance of more perforation coverage and higher perforation rating.

Equipment mounting rails integrate with patch cabling systems:
- Equipment mounting rails include zero U mounting holes beside the EIA 19´´ mounting space that allow the installation of Data Distribution Cable (DDC) patch systems without taking up any critical equipment U-space. AV and Networking enclosure designs do not include hole locations for integration of DDC cabling. Other 1U, 2U, and rear enclosure zero U options are available for use with these enclosures.

Eyebolt support integrated into enclosure frame:
- Integrated eyebolt holes at the top of the enclosure frame allow the enclosure to be lifted for movement and enclosure placement using eyebolt lifting mechanisms. Refer to enclosure user documentation for detailed specifications on eyebolt requirements and enclosure weight limits.

Quick release doors:
- Front door can be moved to the opposite side or interchanged with rear doors. Doors are easily removed with simple lift-off design.

Simple Selection:
- No need to spend hours choosing from and compiling dozens of part numbers to create a single enclosure. Schneider Electric has made it easy by handling the details and providing complete enclosures with single part numbers.

Safety:

Integrated electrical grounding:
- The roof, side panels and front and rear doors are grounded to the frame of the enclosure. Eight additional electrical grounding inserts are located on the frame for external grounding.

Load Capacity:
- A proven frame design, heavy-gauge mounting rails, and heavy-duty casters provide for a 3750 lb (1700 kg) static (levelling feet) and 2250 lb (1023 kg) dynamic (castor) load ratings (42U-52U). The 12U and 18U have a static and dynamic load capacity of 600 and 900 pounds (272/408kgs) respectively. Enclosures have been tested and approved to be combined with proper bolt down accessories to meet various seismic requirements.

Compatiblity:
Optimized for high capacity cable management systems:
- NetShelter SX enclosures are optimized for use with high capacity cable management systems that attach to equipment mounting rails inside enclosures aligning with equipment mounting u-spaces and provide channels for routing and managing cabling.

Integrated with InfraStruxure products:
- Schneider Electric cooling, power distribution, and cable management products work seamlessly with IT enclosures to provide a complete infrastructure support system.

Schneider Electric Rack Systems Compatible:
- Compatible with a variety of Schneider Electric rack accessory products to provide the ability to create a complete rack system. Configure rack solutions using industry leading Schneider Electric Design Portal - Small IT Solution Designer configurator complete with verification of product compatibility and useful 3rd party equipment catalog to aid in visualizing your ideal rack solution.


Technical Specifications:

Physical:
- Maximum Height: 925MM, 92.5CM
- Maximum Width: 600MM, 60.0CM
- Maximum Depth: 1070MM, 107.0CM
- Net Weight: 72.12KG
- Maximum Mounting Depth: 921.0MM, 92.08CM
- Minimum Mounting Depth: 191.0MM, 19.1CM
- Front Door: 16.0gauge
- Vertical Posts: 16.0gauge
- Rear Door: 18.0gauge
- Roof: 18.0gauge
- Side Panels: 18.0gauge
- Units per Pallet: 1.0
- Weight Capacity (static load): 408.23KG
- Weight Capacity (dynamic load): 408.23KG

Environmental:
- Protection Class: IP20
Conformance: Approvals: EIA-310E, UL 2416, UL 60950-1

Sustainable Offer Status:
RoHS:
- Compliant
- Rack Height: 18U
- Rack Width: 19´´

If you are interested in Apc AR3106 Rack Frame Cabin, discover also other electronics and computers products related to Apc in the Computers department and Servers catalogue. In addition, when buying at techinn, your online electronics and computers store, you join the biggest sports community, where you can find opinions, product reviews, and the best offers that you are interested in.