Allied Telesis AT-MMC2000LX/SC Fiber Optic Converter

The Allied Telesis MMC Series of mini media converters leverages its smaller size to not only help the environment with a small carbon footprint, but also to save space in its working environment. Despite its compact size, the MMC Series delivers all the power and functionality of standard size media converters


Features:

Extend Networks:
- The MMC Series are available in 100Mbps or 1000Mbps models. Depending on the model chosen, the fiber-optic port has options for fixed SC, ST, LC or SFP connectors capable of multi-mode or single-mode fiber connectivity. The twisted-pair copper port has an RJ-45 connector supporting either 100Mbps or 1000Mbps, with a maximum operating distance of 100 meters (328 feet).

VLAN Support:
- Many new backbone switch products now support the industry-standard IEEE 802.1Q specification for Virtual LANs (VLANs) that send extra-long data packets on the network. The MMC Series are fully compatible with these long packets, enabling them to be used in modern networks. Media converters not supporting this feature discard these extra long packets, making them unsuitable for modern networks.

Small and Flexible:
- The smaller size and external power supply of the MMC Series allows them to be used almost anywhere.

Smart Missing Link (SML):
- The Smart MissingLink™ (SML) feature monitors network connections and provides notification when network segments fail, allowing network managers to quickly identify the source and location of failed segments and minimize downtime.

Smart Link Restoration:
- Smart Link restoration allows the devices, in cases of power failure, link loss or other interrupted service, to automatically restore the link without the need to restart/reset them.

Power Saving:
- The MMC Series continues the Allied Telesis commitment to the environment with over 50% power savings.2 With just 1.7W of power usage, the MMC Series media converters are some of the most efficient in the market today.

Link Test:
- The link test is a fast and easy way for you to test the connections between the media converter ports and the connected end nodes. If a network problem occurs, you can perform a link test to determine which port is experiencing a problem, and focus your troubleshooting efforts on the right cable or end node.

- Extended Temperature rating of 0°C to 50°C (32°F to 122°F)
- Convert speed as well as media type
- 2K MAC address tables
- Store-and-forward switching mode
- Transparent to IEEE 802.1Q packets
- Auto Negotiation and Auto MDI/MDIX on copper port
- EEE support on copper port
- Far End Fault on Fiber - 10K byte Jumbo packets
- Link/Activity LED per port
- Smart MissingLink
- Fixed SC/ST/LC or SFP (100MB or 1000MB) optics - 12VDC power supply
- Wall-mountable using MMCWLMT
- Locking power supply jack to prevent accidental power disconnects


Specifications:

- Fiber Type: OS1
- Fiber Optic Diameter: 9/125
- Optical Wavelength (Nm): 1310
- Max Distance: 10 km

Power:
- ON: Power
- OFF: No power

SYS:
- ON: System operating normally
- OFF: System not operating normally
- Blinking: Fault condition
- LAN fiber port (Left)
- OFF: No link is established
- ON: Link is established
- Blinking: Activity is detected
- LAN copper port (Right)
- OFF: No link is established
- ON: Link is established
- Blinking: Activity is detected

Operational Characteristics:
- SW1 (left):
- LOW = Link test
- HIGH = Smart MissingLink disabled

SW2 (right):
- LOW = Auto-negotiation (normal operation)
- HIGH = Disable auto-negotiation on copper
- port - force 100Mbps Full Duplex
- MAC address table 2k addresses

Forwarding/filtering rate:
- 1,488,000 for 1000Mbps
- 148,880pps for 100Mbps
- 14,880pps for 10Mbps
- Latency 14.3μsec (64 byte packet,100Mbps full-duplex)

Physical Specifications:
- Dimensions: 5.6 cm × 10.16 cm × 2.18 cm
- (W × D × H): 2.16 in × 4 in × 0.86 in
- Weight: 6 oz

Power Characteristics:
- Power consumption: 140mA@12V typical

Environmental Specifications:
- Operating temperature: 0°C to 50°C (32°F to 122°F)
- Operating humidity: 5% to 95% relative humidity (non-condensing)
- Storage temperature: -40°C to 70°C (-40°F to 158°F)
- Storage humidity: 5% to 95% relative humidity (non-condensing)
- Altitude: Up to 3048 m (10000 ft)

Electrical and Mechanical Approvals:
Safety:
- UL60950-1
- EN60950-1

Emissions (EMI) FCC Class A:
- EN55022 Class A
- CISPR 22 Class A
- C-TICK
- VCCI

Allied telesis AT-MMC2000LX/SC Fiber Optic Converter is the perfect product to reach your electronics and computers goals. Complete your order with other related Switches products and enjoy your life like never before. Some of our Networks products have a special promotion. Find them at techinn! We provide a wide choice from Allied telesis who is renowned in the highest quality materials, they never fail to deliver.