Kingston KSM29RS4/16MEI 1x16GB DDR4 2933Mhz RAM Memory

Kingston´s KSM29RS4/16MEI is a 2G x 72-bit (16GB) DDR4-2933 CL21 SDRAM (Synchronous DRAM) registered w/ parity, 1Rx4, ECC, memory module, based on eighteen 2G x4-bit FBGAcomponents. The SPD is programmed to JEDEC standard latency DDR4-2933 timing of 21-21-21 at 1.2V. Each 288-pin DIMM uses gold contact fingers. The electrical and
mechanical specifications are as follows:


Specifications:

- CL(IDD): 21 cycles
- Row Cycle Time (tRCmin): 350ns(min.)
- Refresh to Active/Refresh: 45.75ns(min.)
- Command Time (tRFCmin): 350ns(min.)
- Row Active Time (tRASmin): 32ns(min.)
- Maximum Operating Power
- UL Rating: 94 V - 0
- Operating Temperature: 0°C to +85o
- Storage Temperature: -55°C to +100°
- Power Supply: VDD = 1.2V
- VDDQ = 1.2V
- VPP = 2.5V
- VDDSPD = 2.25V to 2.75V
- Functionality and operations comply with the DDR4 SDRAM datasheet
- 16 internal banks
- Bank Grouping is applied, and CAS to CAS latency (tCCD_L, tCCD_S) for
the banks in the same or different bank group accesses are available
- Data transfer rates: PC4-2933, PC4-2666, PC4-2400, PC4-2133, PC4-1866, PC4-1600
- Bi-Directional Differential Data Strobe
- 8 bit pre-fetch
- Burst Length (BL) switch on-the-fly BL8 or BC4(Burst Chop)
- Supports ECC error correction and detection
- On-Die Termination (ODT)
- Temperature sensor with integrated SPD
- This product is in compliance with the RoHS directive.
- Per DRAM Addressability is supported
- Internal Vref DQ level generation is available
- Write CRC is supported at all speed grades
- CA parity (Command/Address Parity) mode is supported

If you are interested in Kingston KSM29RS4/16MEI 1x16GB DDR4 2933Mhz RAM Memory, discover also other electronics and computers products related to Kingston in the Components department and RAM catalogue. In addition, when buying at techinn, your online electronics and computers store, you join the biggest sports community, where you can find opinions, product reviews, and the best offers that you are interested in.