Kingston Hyperx Fury HX437C19FB3 1x8GB DDR4 3733Mhz RAM Memory

Automatic translation Original description available here

HyperX HX437C19FB3/8 is a 1G x 64-bit (8GB) DDR4-3733 CL19 SDRAM (Synchronous DRAM) 1Rx8, memory module, based on eight 1G x 8-bit FBGA components per module. Each module kit
supports Intel® Extreme Memory Profiles (Intel® XMP) 2.0. Each module has been tested to run at DDR4-3733 at a low latency timing of 19-23-23 at 1.35V. The SPDs are programmed to JEDEC
standard latency DDR4-2400 timing of 17-17-17 at 1.2V. Each 288-pin DIMM uses gold contact fingers. The JEDEC standard electrical and mechanical specifications are as follows


Features:

- Power Supply: VDD = 1.2V Typical
- VDDQ = 1.2V Typical
- VPP = 2.5V Typical
- VDDSPD = 2.2V to 3.6V
- On-Die termination (ODT)
- 16 internal banks; 4 groups of 4 banks each
- Bi-Directional Differential Data Strobe
- 8 bit pre-fetch
- Burst Length (BL) switch on-the-fly BL8 or BC4(Burst Chop)
- Height 1.3425” (34.1mm), w/heatsink


Specifications:

- CL(IDD): 17 cycles
- Row Cycle Time (tRCmin): 45.75ns(min.)
- Refresh to Active/Refresh Command Time (tRFCmin): 350ns(min.)
- Row Active Time (tRASmin): 32ns(min.)
- UL Rating: 94 V - 0
- Operating Temperature: 0 C to +85 C
- Storage Temperature: -55 C to +100 C

Want to buy Kingston Hyperx Fury HX437C19FB3 1x8GB DDR4 3733Mhz RAM Memory? No further search needed! techinn offers a wide variety of exclusive Ram models. Discover our new Components promotions at techinn. Made by Kingston, this Ram product comes in a range of sizes and colours, and comes complete with everything you’ll need.

Click on the following link to get more information about:

Specifications

Click on the following link to get more information about:

Manual

Size chart